Cynosure
The Cynosure Icon MaxYs is indicated for the treatment of dark pigmented lesions and resistant areas of finer and lighter hair. By using higher peak power of the optimal wavelengths of light, the handpiece achieves smoother, radiant, and aesthetically pleasing skin in delicate body areas. On the other hand, its optimally-filtered light dramatically reduces the appearance of pigmented lesions while its smaller spot size is ideal for the treatment of hard-to-reach areas.
Cynosure’s TempSure Envi technology heats deep into the skin to regenerate collagen and reduce the appearance of forehead wrinkles, frown lines, crow’s feet, and smile lines. Other indications include hair epilation, telangiectasia, and milia. Tempsure Envi Skin Tightening by Cynosure uses mono-polar radio frequency to target the dermis layer of the skin to stimulate the production of collagen and elastin, resulting in firmer, smoother and younger looking skin.
The Palomar MaxG handpiece is exceptionally good for removal of vascular and pigmented lesions. It goes beyond a single wavelength in order to reach the deepest areas of the skin while using a unique combination of Dynamic SpectrumShifting and dual band filters. The MaxG provides uniform application through the entire vessel diameter, which treats even the deepest facial veins. In order to remove pigmentation, this IPL system targets melanin which is a black to brown pigment responsible for tanning of the skin.
The Palomar StarLux 500 is the following model after the StarLux 300. Fundamentally, these laser machines are quite similar. The major difference between the StarLux 300 and StarLux 500 is the built-in Cooling System. The StarLux 500 provides very fast cooling. Only 1 minute after you have plugged in the handpiece, the laser system is cool already. In compare, the StarLux 300 can take more than 5 minutes.
Fractional laser skin resurfacing is used to treat a number of skin conditions with minimal downtime. This laser can penetrate deeply enough to stimulate the collagen but not damage the skin surface. It delivers light to the skin through an array of high precision microbeams that penetrate into the dermis.
Cynosure’s light-based aesthetic systems enable practitioners to deliver the widest range of laser treatments for skin revitilization, hair removal and more. When you decide on a treatment, you want to know it’s safety and effectiveness. That’s why you can feel good about the fact that we chose to partner with Cynosure.
PicoSure is the worlds first aesthetic picosecond laser, widely recognized for its technology leadership, proven performance and industry-leading body of clinical evidence. With features like Boost Adjustable Pressure and optional 1064 and 532 nm wavelengths, PicoSure offers the unmatched versatility of all-color tattoo removal and with a high degree of safety for every patient.
The Vectus Laser is the intelligent choice for the fastest laser hair removal. With the proven reliability and low ownership cost of diode technology, the Vectus Laser provides high-volume permanent hair reduction for a wide range of skin and hair types without sacrificing client comfort. Featuring the largest spot size and most uniform beam profile available today, the Vectus laser allows providers to quickly treat unwanted hair, even in the largest areas, such as the back, in less than five minutes.
The first clinically proven laser device for onychomycosis, or nail fungus. PinPointe FootLaser is turning feet that suffer from unsightly nail fungus into happy feet for men and women the world over. Indicated for use for the temporary increase of clear nail in patients with onychomycosis. e.g., dermatophytes Trichophyton rubrum and T. mentagrophytes, and/or yeasts Candida albicans, etc.
REFURBISHED MAXYS HANDPIECE FOR CYNOSURE PALOMAR ICON FOR SALE!! (REFURBISHED MAXYS HANDPIECE FOR CYNOSURE PALOMAR ICON)
How does Cynosure Icon MaxYs Work?
By delivering optimal wavelengths of light into areas of pigmented lesions, the Cynosure Icon MaxYs generates heat energy that destroys the melanin (pigment responsible for skin color). As a result, pigmented lesions in the area disintegrate and are naturally expelled by the body. Over time, the treated area becomes smoother, healthier, and completely free from pigmented lesions.
When used for permanent hair removal, the heat energy destroys different structures of the hair follicle. This ultimately impairs its ability to regrow hair. With additional treatments, more hair follicles lose their hair-growing ability, leaving the area smoother and hair-free.
Optimized light technology for the treatment of unwanted pigmented lesions – ideal for the chest, arms and hands. The high peak power allows the removal of difficult to treat finer and lighter hair.
Refurbished MaxYs Handpiece for Palomar Cynosure Icon; Manufactured 10-26-2015; Pulse Count = 0 Pulses.
Product Specifications:
#Handpiece #Probe #Cynosure
By delivering optimal wavelengths of light into areas of pigmented lesions, the Cynosure Icon MaxYs generates heat energy that destroys the melanin (pigment responsible for skin color). As a result, pigmented lesions in the area disintegrate and are naturally expelled by the body. Over time, the treated area becomes smoother, healthier, and completely free from pigmented lesions.
When used for permanent hair removal, the heat energy destroys different structures of the hair follicle. This ultimately impairs its ability to regrow hair. With additional treatments, more hair follicles lose their hair-growing ability, leaving the area smoother and hair-free.
Optimized light technology for the treatment of unwanted pigmented lesions – ideal for the chest, arms and hands. The high peak power allows the removal of difficult to treat finer and lighter hair.
Refurbished MaxYs Handpiece for Palomar Cynosure Icon; Manufactured 10-26-2015; Pulse Count = 0 Pulses.
Product Specifications:
- Wavelength : 525–1200 nm
- Spot Size:12 x 28 mm
- Cut Off Filter:525 nm
- Fluence:Up to 90 J/cm2
#Handpiece #Probe #Cynosure
The Cynosure Icon MaxYs is indicated for the treatment of dark pigmented lesions and resistant areas of finer and lighter hair. By using higher peak power of the optimal wavelengths of light, the handpiece achieves smoother, radiant, and aesthetically pleasing skin in delicate body areas. On the other hand, its optimally-filtered light dramatically reduces the appearance of pigmented lesions while its smaller spot size is ideal for the treatment of hard-to-reach areas.
MAXIR HANDPIECE FOR CYNOSURE ICON 2012 FOR SALE!! (MAXIR HANDPIECE FOR CYNOSURE ICON 2012)
The MaxR is specially designed to quickly reduce hair with a pulse laser that delivers longer lasting results than alternative methods. Large and small areas can be treated with equal precision.
What Makes the Palomar Icon MaxR Handpiece Unique?
Cynosure Icon MaxR has been designed for precision hair removal, targeting specific structures of the hair follicle that control hair growth. Only hairs in the growth (or anagen) cycle are affected by the treatment. What truly makes the MaxR unique is that it effectively reduces darker, thicker hair that other laser hair removal treatments do not.
2012 MaxIR Handpiece for Cynosure Icon for Skin Tightening, Body Contouring, & Non-Ablative Skin Rejuvenation; Manufactured 11-02-2012; Excellent Cosmetic and Operating Condition, Single Owner; Pulse Count = 243 Pulses.
Product Specifications:
The Palomar MaxIR handpiece is an infrared handpiece that is designed for deep tissue coagulation. The MaxIR can be used on areas such as the legs, neck and abdomen.
Skin Tightening, Non-Ablative Skin Rejuvenation, Body Contouring.
Infrared heating on areas such as the neck, abdomen, and legs, and soft tissue coagulation.
The Icon system offers industry-leading IPL and laser therapies, as well as Skintel(tm), the industry’s only live melanin reader. Developed with safety and efficacy in mind, these features provide the confidence you need and the results patients want for:
#Handpiece #Probe #Cynosure
What Makes the Palomar Icon MaxR Handpiece Unique?
Cynosure Icon MaxR has been designed for precision hair removal, targeting specific structures of the hair follicle that control hair growth. Only hairs in the growth (or anagen) cycle are affected by the treatment. What truly makes the MaxR unique is that it effectively reduces darker, thicker hair that other laser hair removal treatments do not.
2012 MaxIR Handpiece for Cynosure Icon for Skin Tightening, Body Contouring, & Non-Ablative Skin Rejuvenation; Manufactured 11-02-2012; Excellent Cosmetic and Operating Condition, Single Owner; Pulse Count = 243 Pulses.
Product Specifications:
- Wavelength:850-1350 nm
- Pulse Length:2.5-10 sec.
- Energy:Up to 154 Joules
The Palomar MaxIR handpiece is an infrared handpiece that is designed for deep tissue coagulation. The MaxIR can be used on areas such as the legs, neck and abdomen.
Skin Tightening, Non-Ablative Skin Rejuvenation, Body Contouring.
Infrared heating on areas such as the neck, abdomen, and legs, and soft tissue coagulation.
The Icon system offers industry-leading IPL and laser therapies, as well as Skintel(tm), the industry’s only live melanin reader. Developed with safety and efficacy in mind, these features provide the confidence you need and the results patients want for:
- Facial vessel clearance and pigment reduction
- Surgical and acne scar treatment
- Stretch mark treatment
- Wrinkle reduction
- Leg vein clearance
- Permanent hair reduction
- Fractional skin resurfacing
#Handpiece #Probe #Cynosure
Cynosure's industry-leading aesthetic platform provides a comprehensive suite of popular treatments for your patients, from hair removal to procedures for pigmentation, vessels, wrinkles, scars, and stretch marks.
CYNOSURE TEMPSURE ENVI RF SKIN TIGHTENING & WRINKLE REDUCTION 2018 FOR SALE!! (CYNOSURE TEMPSURE ENVI RF SKIN TIGHTENING 2018)
TempSure Envi is a FDA cleared Skin Tightening treatment that helps to reverse the signs of aging by reducing fine wrinkles, improving facial contours and tightening loose skin, resulting in a much smoother, more even complexion. TempSure Envi is non-invasive, safe and effective on all skin types and involves no downtime. Improve your overall skin quality in areas that are most telling when it comes to age, such as the eyes, brow lines, forehead, cheeks, smile lines and neck.
How does Tempsure Envi Skin Tightening work?
The controlled deep dermal heating triggers the shortening of aged collagen fibres and the production of a huge number of new healthier and stronger collagen fibres. Collagen is the structural protein found in skin that holds connective tissue together. As we age, collagen production slows leading to sagging or tired looking skin. Researchers suggest we lose approximately 1 percent of collagen per year.
Why Choose Tempsure Envi Treatments?
Low-to-no pain, non-invasive, and results-driven: that’s what you get when you choose a TempSure Envi treatment. Most clients who receive this treatment feel no discomfort or pain during the treatment. Another large benefit to TempSure Envi treatments is the immediate results. While these fast results are temporary, new collagen continues to be produced in the time after your session, leaving your skin refreshed and tightened for months afterwards. This advanced technology allows your certified aesthetician to control the temperature of the device in real-time, granting precise control over your TempSure Envi treatment.
What Problems Can Tempsure Envi Address?
tempsure enviTempSure Envi treatments are safe to address face and body concerns, including:
Tempsure Envi Product Specifications:
TempSure Firm Handpiece
The TempSure Firm handpieces are ideal for driving continuous, non-invasive monopolar RF energy to areas such as the abdomen, arms, buttocks, and thighs.
TempSure Vitalia Handpiece
The only true temperature-controlled radiofrequency probe for women’s wellness. The TempSure Vitalia probe is specifically designed for your patient’s smaller, hard-to-reach areas. Now you can provide your patients with easy treatments to maintain their wellness without hormones, invasive procedures or downtime.
TempSure Surgical Handpiece – RF Technology
TempSure Surgical is the ideal choice for cutting and coagulation across a breadth of surgical applications.
Taking the guesswork out of RF
Therapeutic Logic Control (TLC) activates a timer when tissue has reached therapeutic temperature, allowing for proper delivery of RF every time. Treatments are safe for all skin types, and 96% of patients described TempSure as comfortable.
#cynosure #cynosurelaser #beautylaserequipment
How does Tempsure Envi Skin Tightening work?
The controlled deep dermal heating triggers the shortening of aged collagen fibres and the production of a huge number of new healthier and stronger collagen fibres. Collagen is the structural protein found in skin that holds connective tissue together. As we age, collagen production slows leading to sagging or tired looking skin. Researchers suggest we lose approximately 1 percent of collagen per year.
Why Choose Tempsure Envi Treatments?
Low-to-no pain, non-invasive, and results-driven: that’s what you get when you choose a TempSure Envi treatment. Most clients who receive this treatment feel no discomfort or pain during the treatment. Another large benefit to TempSure Envi treatments is the immediate results. While these fast results are temporary, new collagen continues to be produced in the time after your session, leaving your skin refreshed and tightened for months afterwards. This advanced technology allows your certified aesthetician to control the temperature of the device in real-time, granting precise control over your TempSure Envi treatment.
What Problems Can Tempsure Envi Address?
tempsure enviTempSure Envi treatments are safe to address face and body concerns, including:
- Reduction of Facial Wrinkles
- Frown Lines
- Crow’s Feet
- Smile Lines
- Skin Tightening
- Undereye Bags
Tempsure Envi Product Specifications:
- Laser Type: Monopolar Radio Frequency
- Energy: 300
- 10mm Handpiece
- 15mm Handpiece
- 20mm Handpiece
- 25mm Handpiece
- 30mm Handpiece;
TempSure Firm Handpiece
The TempSure Firm handpieces are ideal for driving continuous, non-invasive monopolar RF energy to areas such as the abdomen, arms, buttocks, and thighs.
TempSure Vitalia Handpiece
The only true temperature-controlled radiofrequency probe for women’s wellness. The TempSure Vitalia probe is specifically designed for your patient’s smaller, hard-to-reach areas. Now you can provide your patients with easy treatments to maintain their wellness without hormones, invasive procedures or downtime.
TempSure Surgical Handpiece – RF Technology
TempSure Surgical is the ideal choice for cutting and coagulation across a breadth of surgical applications.
Taking the guesswork out of RF
Therapeutic Logic Control (TLC) activates a timer when tissue has reached therapeutic temperature, allowing for proper delivery of RF every time. Treatments are safe for all skin types, and 96% of patients described TempSure as comfortable.
- Best-in-class temperature sensing with up to 100x faster response time than the competition1
- Safe, consistent and reliable RF skin tightening* treatments in any practitioner’s hands2
- Powerful 300W generator with 4MHz RF delivery supports future applications.
- Three handpiece sizes ranging from 10mm to 20mm for customizable treatments
- Soothing spa tones delivered during treatment for enhanced patient satisfaction
#cynosure #cynosurelaser #beautylaserequipment
Cynosure’s TempSure Envi technology heats deep into the skin to regenerate collagen and reduce the appearance of forehead wrinkles, frown lines, crow’s feet, and smile lines. Other indications include hair epilation, telangiectasia, and milia. Tempsure Envi Skin Tightening by Cynosure uses mono-polar radio frequency to target the dermis layer of the skin to stimulate the production of collagen and elastin, resulting in firmer, smoother and younger looking skin.
CYNOSURE TEMPSURE ENVI RF LASER 2019 FOR SALE!! (CYNOSURE TEMPSURE ENVI RF LASER 2019)
TempSure Envi is a non-invasive laser treatment that uses radiofrequency energy to tighten loose skin on the face and body. This treatment can also minimize facial wrinkles & fine lines and improves the appearance of cellulite. As our bodies age, they lose the ability to quickly generate collagen. This non-invasive, light-based treatment targets and destroys treated fat cells. For good. Just natural-looking and permanent results. No surgery. No downtime.
It’s safe for all skin types and levels of sun exposure, so it fits perfectly into any beauty maintenance routine, any time of year. TempSure Envi treatments require no surgery, no needles, and no downtime, so you can immediately get back to what you were doing, and look great doing it.
TempSure Firm
The TempSure Firm handpieces are ideal for driving continuous, non-invasive monopolar RF energy to areas such as the abdomen, arms, buttocks, and thighs.
TempSure Vitalia
The only true temperature-controlled radiofrequency probe for womens wellness. The TempSure Vitalia probe is specifically designed for your patient smaller, hard to reach areas. Now you can provide your patients with easy treatments to maintain their wellness without hormones, invasive procedures or downtime.
TempSure Surgical RF Technology
TempSure Surgical is the ideal choice for cutting and coagulation across a breadth of surgical applications
Included Handpieces: (5) Smart Tempsure Envi Handpieces: 10mm, 15mm, 20mm, 25mm, and 30mm, (1) Tempsure Firm 60mm Handpiece, (1) Vitalia (Vaginal Rejuvenation) Handpiece, & (1) Surgical Handpiece; Handpieces Life Remaining: Smart Tempsure Envi 10mm = 95%, 15mm = 97%, 20mm = 96%, 25mm = 100%, 30mm = 100%, Tempsure Firm 60mm = 96%.
#cynosure #cynosurelaser #beautylaserequipment
It’s safe for all skin types and levels of sun exposure, so it fits perfectly into any beauty maintenance routine, any time of year. TempSure Envi treatments require no surgery, no needles, and no downtime, so you can immediately get back to what you were doing, and look great doing it.
- Best-in-class temperature sensing with up to 100x faster response time than the competition.
- Safe, consistent and reliable RF skin tightening treatments in any practitioner’s hands.
- Powerful 300W generator with 4MHz RF delivery supports future applications.
- Three handpiece sizes ranging from 10mm to 20mm for customizable treatments
- Soothing spa tones delivered during treatment for enhanced patient satisfaction
TempSure Firm
The TempSure Firm handpieces are ideal for driving continuous, non-invasive monopolar RF energy to areas such as the abdomen, arms, buttocks, and thighs.
TempSure Vitalia
The only true temperature-controlled radiofrequency probe for womens wellness. The TempSure Vitalia probe is specifically designed for your patient smaller, hard to reach areas. Now you can provide your patients with easy treatments to maintain their wellness without hormones, invasive procedures or downtime.
TempSure Surgical RF Technology
TempSure Surgical is the ideal choice for cutting and coagulation across a breadth of surgical applications
Included Handpieces: (5) Smart Tempsure Envi Handpieces: 10mm, 15mm, 20mm, 25mm, and 30mm, (1) Tempsure Firm 60mm Handpiece, (1) Vitalia (Vaginal Rejuvenation) Handpiece, & (1) Surgical Handpiece; Handpieces Life Remaining: Smart Tempsure Envi 10mm = 95%, 15mm = 97%, 20mm = 96%, 25mm = 100%, 30mm = 100%, Tempsure Firm 60mm = 96%.
#cynosure #cynosurelaser #beautylaserequipment
Cynosure’s TempSure Envi technology heats deep into the skin to regenerate collagen and reduce the appearance of forehead wrinkles, frown lines, crow’s feet, and smile lines. Other indications include hair epilation, telangiectasia, and milia.
MAXG HANDPIECE FOR CYNOSURE PALOMAR STARLUX 500 2014 FOR SALE!! (MAXG HANDPIECE FOR CYNOSURE PALOMAR STARLUX 500 2014)
MaxG Comfortably clears pigmented and vascular lesions for skin rejuvenation, using dual filters for the optimal range of light. MaxG is recommended for patients with type 1 (ivory skin), type 2 (fair skin), type 3 (fair to beige), and type 4 (light brown) skin. In addition, it’s recommended to be used on untanned skin.
2014 MaxG Handpiece for Palomar Starlux 500; Manufactured 10/08/2014; Good Cosmetic and Excellent Operating Condition; Single Owner; Pulse Count = 17,381 Pulses.
MaxG Product Specifications:
#Handpiece #Probe #Cynosure
2014 MaxG Handpiece for Palomar Starlux 500; Manufactured 10/08/2014; Good Cosmetic and Excellent Operating Condition; Single Owner; Pulse Count = 17,381 Pulses.
MaxG Product Specifications:
- Wavelength: 500-670 nm & 870-1200 nm
- Pulse Width: 5-100 ms
- Spot Size: 10 x 15 mm
- Energy: up to 80 J/cm2
- Indicated Use: Pigment, Vascular Lesions, Skin Rejuvenation
#Handpiece #Probe #Cynosure
The Palomar MaxG handpiece is exceptionally good for removal of vascular and pigmented lesions. It goes beyond a single wavelength in order to reach the deepest areas of the skin while using a unique combination of Dynamic SpectrumShifting and dual band filters. The MaxG provides uniform application through the entire vessel diameter, which treats even the deepest facial veins. In order to remove pigmentation, this IPL system targets melanin which is a black to brown pigment responsible for tanning of the skin.
CYNOSURE PALOMAR ICON 2016 FOR SALE!! (CYNOSURE, CYNOSURE PALOMAR ICON 2016)
The Cynosure Icon is an industry leading multi-purpose platform system that treats hair removal, pigmentation, vessels, wrinkles, scars and stretch marks. This aesthetic device is used for new and existing practices due to the amount of treatments that can be offered. Service and maintenance for the Icon is simple for customers and some can be completed with virtual assistance. Here are the applications for each handpiece:
Includes:
#cynosure #cynosurelaser #beautylaserequipment
- MaxG- pigmentation, skin tightening
- MaxR- hair removal
- MaxY- light colored hair removal
- 1540- non-ablative skin resurfacing
- 2940- ablative skin resurfacing
Includes:
- Base Unit
- 1540 Fractional Hand Piece
- Pulse Count: 16627
- Max R Hand Piece
- Pulse Count: 10991
- Max Ys Hand Piece
- Pulse Count: 11853
- Max G Hand Piece
- Pulse Count: 74888
- Foot Pedal
- Power Cord
- Manual
#cynosure #cynosurelaser #beautylaserequipment
1540 nm Fractional Erbium Glass Handpiece – Fractional Non-Ablative Skin Resurfacing, Scar & Stretch Mark Removal.
CYNOSURE PALOMAR ICON LASER 2018 FOR SALE!! (CYNOSURE PALOMAR ICON LASER 2018)
The Cynosure Icon is an advanced aesthetic platform laser machine offering multiple wavelengths and treatment options in one system. This enables the user, whether a doctor or practitioner, to maximise return on investment by being able to offer the most popular treatment from hair removal to wrinkle reduction and scarring.
The Icon™ laser treats a variety of concerns to improve the look and feel of your skin:
The cynosure Icon Aesthetic laser System, which was once known as the Paloma Icon, offers:
Also Includes: Footswitch, Operators Manual.
#cynosure #cynosurelaser #beautylaserequipment
The Icon™ laser treats a variety of concerns to improve the look and feel of your skin:
- Remove unwanted hair
- Eliminate brown spots
- Eliminate fine wrinkles
- Reduce sagginess by tightening skin
- Facial vascular removal
- Remove signs of rosacea
- Remove scars
- Remove stretch marks
- Remove veins on the legs
The cynosure Icon Aesthetic laser System, which was once known as the Paloma Icon, offers:
- high peak powers
- state-of-the-art cooling system
- built in calibration as well as
- Skintel Reader melanin reader
Also Includes: Footswitch, Operators Manual.
#cynosure #cynosurelaser #beautylaserequipment
The Cynosure ICON laser aesthetic system offers an option for nearly every patient. This device comes with multiple handpieces for a comprehensive laser device. This system includes industry-leading IPL and laser therapies.
CYNOSURE PALOMAR ICON LASER 2013 FOR SALE!! (CYNOSURE PALOMAR ICON LASER 2013)
Palomar has been a leading developer of cosmetic laser and light-based skin treatments since 1991. Thousands of businesses across the globe, including med spas and dermatology practices, use Palomar technology.
In 2013, Cynosure, another company at the forefront of cosmetic and medical laser development, acquired Palomar. Together, these two world-class research and development organizations continue to improve and redefine the laser and light-based skin care industry.
Laser Rx is committed to excellence, which is why they exclusively offer Palomar/Cynosure laser systems on a rental basis.
Description:
PRODUCT SPECIFICATIONS
#cynosure #cynosurelaser #beautylaserequipment
In 2013, Cynosure, another company at the forefront of cosmetic and medical laser development, acquired Palomar. Together, these two world-class research and development organizations continue to improve and redefine the laser and light-based skin care industry.
Laser Rx is committed to excellence, which is why they exclusively offer Palomar/Cynosure laser systems on a rental basis.
Description:
- Cynosure Palomar ICON IPL system
- Eligible for up to 5 years of Protection
- refurbished, like new
- Accessories: foot pedal, eye wear, power cord, key
- Shot/Pulse Count: refurbished
- Hour Count: n/a
- Handpieces: Max G, Max Ys, Lux 1540 (all handpieces refurbed and zero shots)
- General Condition: refurbished
- Power: other
- Ownership: Owned
- Last Serviced: 2020
- Operator Manuals: Yes
- Currently Under Factory Warranty : No
- Original Boxes/Crate: Yes
- Ships from UT
PRODUCT SPECIFICATIONS
- Palomar Icon
- Handieces
- MaxG
- Max Ys
- Max R
- Max Rs
- Lux 1540
- Fractional 2940
- Lux 1064
- MaxIR
#cynosure #cynosurelaser #beautylaserequipment
Cynosure Palomar Icon with 4 Handpieces -1540 Fractional (Non-Ablative Skin Resurfacing, Scar & Stretch Mark), Max G (Pigment & Vascular Lesions), MaxIR (Infared Skin Tightening), Max Ys (Pigment & Fine Hair Removal) Handpieces.
CYNOSURE PALOMAR STARLUX 500 WITH (5) HANDPIECES 2013 FOR SALE!! (CYNOSURE PALOMAR STARLUX 500 WITH (5) HANDPIECES 2013)
Furthermore, the StarLux 500 can handle the Lux1440 and Lux1540 Non-ablative Fractional Laser Handpieces. The Palomar StarLux 500 Laser System also handles the Lux2940 Ablative Fractional Laser Handpiece which allows for wrinkle treatment and improvement of textural irregularities.
The StarLux 500 Laser and Intense Pulsed Light (IPL) platform from Palomar gives you a simple and affordable way to treat your clients, facilitating a wide variety of cosmetic and aesthetic procedures with less risk and superior outcomes.
The StarLux 500 laser and IPL system is clinically proven to produce results as good as or better than single-procedure lasers with less client pain. The high-powered StarLux 500 provides the most-requested aesthetic treatments, with Palomar’s many patented innovations:
Manufactured 05/2013; Excellent Cosmetic & Operating Condition, Received Full Service & Maintenance 11/2021 and Has Been Certified to be Fully Functional at Highest Levels, Record Available Upon Request; Reason for Selling: Downsizing; Software Version: 7.20; Total System Pulse Count = 98,248 Pulses;
MaxG = 12,773 Pulses (for Pigment and Vascular Removal, Skin Rejuvenation),
LuxR = 13,412 Pulses (for Large Spot Size Laser Hair Removal Equipment that Removes Hair on all Skin Types, From the Fairest to the Darkest, Including Tanned Skin),
LuxYs = 8,239 Pulses (Hair Removal of Finer Lighter Hair, and Darker Pigment with Larger Spot Size), Lux1064 = 3,827 Pulses (for Hair Removal),
Lux1540 with 10mm Tip Attachment = 20,246 Pulses (Fractional Skin Resurfacing );
Also Includes: Footswitch, (2) Keys, Operator Manual, Interlock.
Starlux 500 PRODUCT SPECIFICATIONS
Handpeices
LuxRs: Wavelength 650-1200 nm; Pulse Width 5-100 ms; Spot Size 12×28 mm; Energy up to 70 J/cm2
LuxR: Wavelength 650-1200 nm; Pulse Width 5-100 ms; Spot Size 16×46 mm; Energy up to 45 J/cm2
LuxYs: Wavelength 525-1200 nm; Pulse Width 5-100 ms; Spot Size 12×28 mm; Energy up to 80 J/cm2
LuxY: Wavelength 525-1200 nm; Pulse Width 1-100 ms; Spot Size 16×46 mm; Energy up to 48 J/cm2
LuxG: Wavelength 500-670 & 870-1200 nm; Pulse Width 1-100 ms; Spot Size 10×15 mm; Energy up to 70 J/cm2
MaxG: Wavelength 500-670 & 870-1200 nm; Pulse Width 5-100 ms; Spot Size 10×15 mm; Energy up to 80 J/cm2
LuxV: Wavelength 400-700 & 870-1200 nm; Pulse Width 1-400 ms; Spot Size 16×46 mm; Energy up to 26 J/cm2
Lux1064 : Wavelength 1064 nm; Pulse Width 1-100 ms; Spot Size 1.5 mm, 3 mm, 6 mm, 10 mm; Energy 1.5 mm 250-700 J/cm2; Energy 3 mm 70-450 J/cm2; Energy 6 mm 16-140 J/cm2; Energy 10 mm 10-45 J/cm2
Lux1440: Wavelength 1440 nm; Pulse Width 3-10; Spot Size 10, 12×12, & 15 mm; Energy 10 mm 14-70 mJ/microbeam; Energy 12×12 mm 32-80 mJ/microbeam; Energy 15 mm 2-14 mJ/microbeam
Lux1540: Wavelength 1540 nm; Pulse Width 10 ms & 15 ms; Spot Size 10, 12×12, & 15 mm; Energy 10 mm 14-70 mJ/microbeam; Energy 12×12 mm 20780 mJ/microbeam; Energy 15 mm 3-15 mJ/microbeam
LuxDeepIR: Wavelength 850-1350 nm; Pulse Width 2.5-10 sec; Spot Size 12×28 mm; Energy 30-154 J/cm2
Lux2940: Wavelength 2940 nm; Pulse Width .25, 3, 5 ms; Spot Size 6×6,10×10 mm; Optic Silver Energy (mJ/mB)(Groove Optic)2 – 5.5 mJ/0.1 mm; Purple (Flatbeam) 2 – 4 J/cm2; Blue 450 fractional 3 -9 J/cm2; Green 1200 fractional 8 – 24 mJ; Red 140 fractional 3 – 9 mJ
Speed: Up to 3 Hz (Pulse Rate).
Electrical Req.: 100-240 V, 50/60 Hz.
System Weight: 58 lb.
Chiller Weight: 35 lb.
Cart Weight: 56 lb.
Palomar StarLux 500 Laser System Applications:
#cynosure #cynosurelaser #beautylaserequipment
The StarLux 500 Laser and Intense Pulsed Light (IPL) platform from Palomar gives you a simple and affordable way to treat your clients, facilitating a wide variety of cosmetic and aesthetic procedures with less risk and superior outcomes.
The StarLux 500 laser and IPL system is clinically proven to produce results as good as or better than single-procedure lasers with less client pain. The high-powered StarLux 500 provides the most-requested aesthetic treatments, with Palomar’s many patented innovations:
- High Power: 70% more power, with unmatched speed and efficacy: more clients, fewer treatments
- Accu Spectrum: Dual filters minimize unnecessary epidermal exposure, enhancing client comfort.
Manufactured 05/2013; Excellent Cosmetic & Operating Condition, Received Full Service & Maintenance 11/2021 and Has Been Certified to be Fully Functional at Highest Levels, Record Available Upon Request; Reason for Selling: Downsizing; Software Version: 7.20; Total System Pulse Count = 98,248 Pulses;
MaxG = 12,773 Pulses (for Pigment and Vascular Removal, Skin Rejuvenation),
LuxR = 13,412 Pulses (for Large Spot Size Laser Hair Removal Equipment that Removes Hair on all Skin Types, From the Fairest to the Darkest, Including Tanned Skin),
LuxYs = 8,239 Pulses (Hair Removal of Finer Lighter Hair, and Darker Pigment with Larger Spot Size), Lux1064 = 3,827 Pulses (for Hair Removal),
Lux1540 with 10mm Tip Attachment = 20,246 Pulses (Fractional Skin Resurfacing );
Also Includes: Footswitch, (2) Keys, Operator Manual, Interlock.
Starlux 500 PRODUCT SPECIFICATIONS
Handpeices
LuxRs: Wavelength 650-1200 nm; Pulse Width 5-100 ms; Spot Size 12×28 mm; Energy up to 70 J/cm2
LuxR: Wavelength 650-1200 nm; Pulse Width 5-100 ms; Spot Size 16×46 mm; Energy up to 45 J/cm2
LuxYs: Wavelength 525-1200 nm; Pulse Width 5-100 ms; Spot Size 12×28 mm; Energy up to 80 J/cm2
LuxY: Wavelength 525-1200 nm; Pulse Width 1-100 ms; Spot Size 16×46 mm; Energy up to 48 J/cm2
LuxG: Wavelength 500-670 & 870-1200 nm; Pulse Width 1-100 ms; Spot Size 10×15 mm; Energy up to 70 J/cm2
MaxG: Wavelength 500-670 & 870-1200 nm; Pulse Width 5-100 ms; Spot Size 10×15 mm; Energy up to 80 J/cm2
LuxV: Wavelength 400-700 & 870-1200 nm; Pulse Width 1-400 ms; Spot Size 16×46 mm; Energy up to 26 J/cm2
Lux1064 : Wavelength 1064 nm; Pulse Width 1-100 ms; Spot Size 1.5 mm, 3 mm, 6 mm, 10 mm; Energy 1.5 mm 250-700 J/cm2; Energy 3 mm 70-450 J/cm2; Energy 6 mm 16-140 J/cm2; Energy 10 mm 10-45 J/cm2
Lux1440: Wavelength 1440 nm; Pulse Width 3-10; Spot Size 10, 12×12, & 15 mm; Energy 10 mm 14-70 mJ/microbeam; Energy 12×12 mm 32-80 mJ/microbeam; Energy 15 mm 2-14 mJ/microbeam
Lux1540: Wavelength 1540 nm; Pulse Width 10 ms & 15 ms; Spot Size 10, 12×12, & 15 mm; Energy 10 mm 14-70 mJ/microbeam; Energy 12×12 mm 20780 mJ/microbeam; Energy 15 mm 3-15 mJ/microbeam
LuxDeepIR: Wavelength 850-1350 nm; Pulse Width 2.5-10 sec; Spot Size 12×28 mm; Energy 30-154 J/cm2
Lux2940: Wavelength 2940 nm; Pulse Width .25, 3, 5 ms; Spot Size 6×6,10×10 mm; Optic Silver Energy (mJ/mB)(Groove Optic)2 – 5.5 mJ/0.1 mm; Purple (Flatbeam) 2 – 4 J/cm2; Blue 450 fractional 3 -9 J/cm2; Green 1200 fractional 8 – 24 mJ; Red 140 fractional 3 – 9 mJ
Speed: Up to 3 Hz (Pulse Rate).
Electrical Req.: 100-240 V, 50/60 Hz.
System Weight: 58 lb.
Chiller Weight: 35 lb.
Cart Weight: 56 lb.
Palomar StarLux 500 Laser System Applications:
- Wrinkle Reduction
- Laser Hair Removal
- Skin Tightening
- Acne Treatment
- Skin Rejuvenation
- Leg Veins
- Pigmented Lesions
- Facial Veins
- Brown Spots
- Fractional Ablative Skin Resurfacing
- Fractional Non-ablative Skin Resurfacing
#cynosure #cynosurelaser #beautylaserequipment
The Palomar StarLux 500 is the following model after the StarLux 300. Fundamentally, these laser machines are quite similar. The major difference between the StarLux 300 and StarLux 500 is the built-in Cooling System. The StarLux 500 provides very fast cooling. Only 1 minute after you have plugged in the handpiece, the laser system is cool already. In compare, the StarLux 300 can take more than 5 minutes.
CYNOSURE PALOMAR ICON WITH MAXG, MAXR, MAXYS & 1540 FRACTIONAL 2017 FOR SALE!! (CYNOSURE PALOMAR ICON 2017 )
The effect of this is skin coagulation in columns, surrounded by healthy, unaffected skin. This stimulates collagen production in the skin which then repairs itself with new younger, healthier skin.
Introducing the Cynosure Icon laser - the ultimate solution for all your aesthetic needs. This state-of-the-art device offers a wide range of treatments, from laser hair removal and pigmented lesion treatment to wrinkle reduction and skin rejuvenation. The Icon laser uses advanced technology to deliver highly precise and customizable treatments. Its unique design allows for easy, comfortable and safe use, making it a popular choice among dermatologists, plastic surgeons and other medical professionals. With the Icon laser, you can achieve smooth, hair-free skin without the need for waxing or shaving. Pigmented lesions such as age spots, sun spots, and freckles can be treated quickly and effectively, leaving your skin looking youthful and even-toned.
The Icon laser is also great for treating wrinkles and fine lines, helping you achieve a youthful, radiant appearance. Its unique skin rejuvenation treatments can reduce the appearance of acne scars, hyperpigmentation, and sun damage, leaving your skin looking smooth, even and healthy. The Cynosure Icon laser is also a versatile device, with multiple handpieces that can be used for a wide range of skin concerns, including acne, acne scarring, rosacea, and more.
The Icon Aesthetic System offers high peak powers, state-of-the-art cooling, built in calibration, and the Skintel Readerthe only FDA-cleared melanin readerresulting in fast treatments with excellent outcomes. With the Icon system, aesthetic practices can provide the most popular treatments, including:
MaxG
Optimized light technology for superior clearance of vascular and pigmented lesions that goes beyond single-wavelength lasers. With the unique combination of Dynamic Spectrum ShiftingSM and dual-band filters, the MaxG provides more uniform heating across the entire diameter of the vessel, clearing even the deepest facial vessels.
1540 Fractional
Fractional, non-ablative laser for skin resurfacing and the treatment of surgical scars, acne scars and stretch marks the only FDA cleared laser for this treatment. The various Microlenses allow for customized treatments; the XF Microlens for high speed, quick treatment sessions or the XD Microlens for deeper penetration to reach tough conditions such as scars and stretch marks.
MaxYs
Optimized light technology for the treatment of unwanted pigmented lesions ideal for the chest, arms and hands. The high peak power allows the removal of difficult to treat finer and lighter hair.
2940 Fractional
Fractional, ablative laser for the treatment of wrinkles and textural irregularities. This one-time treatment provides dramatic results with fast recovery and minimal downtime.
1064
Comfortably clears a variety of leg vessels, from the smaller red vessels to the larger blue reticular leg veins. This handpiece can also be used for laser hair removal on darker skin types.
MaxR
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The large spot size quickly covers larger areas such as the back, legs, and chest.
MaxRs
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The small spot size is perfect for smaller areas such as the face, underams, and bikini line.
MaxIR
The Palomar MaxIR handpiece is an infrared handpiece that is designed for deep tissue coagulation. The MaxIR can be used on areas such as the legs, neck and abdomen.
Skin Tightening, Non-Ablative Skin Rejuvenation, Body Contouring. Infrared heating on areas such as the neck, abdomen, and legs, and soft tissue coagulation.
2017 Cynosure Palomar Icon with MaxG (Pigment & Vascular Lesions), MaxR (All Skin Types Hair Removal), MaxYs (Pigment & Finer Hair Removal) & 1540 Fractional (Non-Ablative Skin Resurfacing, Scar & Stretch Mark Removal); Manufactured 05/2017; Pristine Cosmetic and Operating Condition – Very Low Use and Very Low Total Pulses!; Reason for Selling: Downsizing; Software Version: 4.10; Total System Pulse Count = 111,602 Pulses; Handpieces Included and Pulse Counts: MaxG = 30,470 Pulses, Max R = 63,632 Pulses, MaxYs = 177 Pulses, & 1540 Fractional = 17,323 Pulses; Also Includes: Footswitch, Skintel Melanin Reader, Operator Manual, Treatment Guide, Operator Eyewear, Patient Eye Shields.
Product Specifications:
Handpieces:
MaxG
#cynosure #cynosurelaser #beautylaserequipment
Introducing the Cynosure Icon laser - the ultimate solution for all your aesthetic needs. This state-of-the-art device offers a wide range of treatments, from laser hair removal and pigmented lesion treatment to wrinkle reduction and skin rejuvenation. The Icon laser uses advanced technology to deliver highly precise and customizable treatments. Its unique design allows for easy, comfortable and safe use, making it a popular choice among dermatologists, plastic surgeons and other medical professionals. With the Icon laser, you can achieve smooth, hair-free skin without the need for waxing or shaving. Pigmented lesions such as age spots, sun spots, and freckles can be treated quickly and effectively, leaving your skin looking youthful and even-toned.
The Icon laser is also great for treating wrinkles and fine lines, helping you achieve a youthful, radiant appearance. Its unique skin rejuvenation treatments can reduce the appearance of acne scars, hyperpigmentation, and sun damage, leaving your skin looking smooth, even and healthy. The Cynosure Icon laser is also a versatile device, with multiple handpieces that can be used for a wide range of skin concerns, including acne, acne scarring, rosacea, and more.
The Icon Aesthetic System offers high peak powers, state-of-the-art cooling, built in calibration, and the Skintel Readerthe only FDA-cleared melanin readerresulting in fast treatments with excellent outcomes. With the Icon system, aesthetic practices can provide the most popular treatments, including:
- laser skin resurfacing
- laser wrinkle reduction
- laser scar and stretch mark treatment
- permanent hair reduction
- vessel and pigment clearance
- leg vein clearance
MaxG
Optimized light technology for superior clearance of vascular and pigmented lesions that goes beyond single-wavelength lasers. With the unique combination of Dynamic Spectrum ShiftingSM and dual-band filters, the MaxG provides more uniform heating across the entire diameter of the vessel, clearing even the deepest facial vessels.
1540 Fractional
Fractional, non-ablative laser for skin resurfacing and the treatment of surgical scars, acne scars and stretch marks the only FDA cleared laser for this treatment. The various Microlenses allow for customized treatments; the XF Microlens for high speed, quick treatment sessions or the XD Microlens for deeper penetration to reach tough conditions such as scars and stretch marks.
MaxYs
Optimized light technology for the treatment of unwanted pigmented lesions ideal for the chest, arms and hands. The high peak power allows the removal of difficult to treat finer and lighter hair.
2940 Fractional
Fractional, ablative laser for the treatment of wrinkles and textural irregularities. This one-time treatment provides dramatic results with fast recovery and minimal downtime.
1064
Comfortably clears a variety of leg vessels, from the smaller red vessels to the larger blue reticular leg veins. This handpiece can also be used for laser hair removal on darker skin types.
MaxR
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The large spot size quickly covers larger areas such as the back, legs, and chest.
MaxRs
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The small spot size is perfect for smaller areas such as the face, underams, and bikini line.
MaxIR
The Palomar MaxIR handpiece is an infrared handpiece that is designed for deep tissue coagulation. The MaxIR can be used on areas such as the legs, neck and abdomen.
Skin Tightening, Non-Ablative Skin Rejuvenation, Body Contouring. Infrared heating on areas such as the neck, abdomen, and legs, and soft tissue coagulation.
2017 Cynosure Palomar Icon with MaxG (Pigment & Vascular Lesions), MaxR (All Skin Types Hair Removal), MaxYs (Pigment & Finer Hair Removal) & 1540 Fractional (Non-Ablative Skin Resurfacing, Scar & Stretch Mark Removal); Manufactured 05/2017; Pristine Cosmetic and Operating Condition – Very Low Use and Very Low Total Pulses!; Reason for Selling: Downsizing; Software Version: 4.10; Total System Pulse Count = 111,602 Pulses; Handpieces Included and Pulse Counts: MaxG = 30,470 Pulses, Max R = 63,632 Pulses, MaxYs = 177 Pulses, & 1540 Fractional = 17,323 Pulses; Also Includes: Footswitch, Skintel Melanin Reader, Operator Manual, Treatment Guide, Operator Eyewear, Patient Eye Shields.
Product Specifications:
- Palomar Icon
- Voltage:90-264 VAC, 50/60 Hz (20 amp circuit required)
- Max Power:1600 VA
- Repetition Rate:0.2 – 6 Hz
- Dimensions:23″W x 22″D x 41”H
- Weight:135 lbs
Handpieces:
MaxG
- Spot Size:10 x 15 mm
- Cut Off Filter:500 & 870 nm
- Fluence: Up to 80 J/cm2
- Spot Size:12 x 28 mm
- Cut Off Filter:525 nm
- Fluence: Up to 90 J/cm2
- Spot Size:16 x 46 mm
- Cut Off Filter:650 nm
- Fluence: Up to 48 J/cm2
- Spot Size:12 x 28 mm
- Cut Off Filter:650 nm
- Fluence: Up to 72 J/cm2
- Spot Size:12 & 15 mm
- Cut Off Filter:Er-Glass
- Wavelength:1540 nm
- Pulsewidth:10 & 15 ms
- Spot Size:6 & 10 mm
- Cut Off Filter:Er-YAG
- Wavelength:2940 nm
- Pulsewidth:0.25, 3 7 5 ms
- Spot Size:1.5,3,6 &10 mm
- Cut Off Filter:Nd-YAG
- Wavelength:1064 nm
- Pulsewidth:10-100 ms
- Wavelength:850-1350 nm
- Pulse Length:2.5-10 sec.
- Energy:Up to 154 Joules
#cynosure #cynosurelaser #beautylaserequipment
Fractional laser skin resurfacing is used to treat a number of skin conditions with minimal downtime. This laser can penetrate deeply enough to stimulate the collagen but not damage the skin surface. It delivers light to the skin through an array of high precision microbeams that penetrate into the dermis.
CYNOSURE PALOMAR ICON WITH MAXG (PIGMENT & VEIN) & MAXR (LARGE SPOT SIZE HAIR REMOVAL) 2013 FOR SALE!! (CYNOSURE PALOMAR ICON WITH MAXG & MAXR 2013)
The Icon Aesthetic System offers high peak powers, state-of-the-art cooling, built in calibration, and the Skintel Readerthe only FDA-cleared melanin reader resulting in fast treatments with excellent outcomes.
With the Icon system, aesthetic practices can provide the most popular treatments, including:
Software Version: 4.20; Total System Pulse Count = 26,700 Pulses; Handpieces Included and Pulse Counts: MaxG Handpiece = 6,105 Pulses, MaxR Handpiece = 3,162 Pulses; Also Includes: Footswitch, Operator Eyewear, Patient Eyewear, Operators Manual, Treatment Guide.
Icon Product Specifications:
MaxG
Optimized light technology for superior clearance of vascular and pigmented lesions that goes beyond single-wavelength lasers. With the unique combination of Dynamic Spectrum ShiftingSM and dual-band filters, the MaxG provides more uniform heating across the entire diameter of the vessel, clearing even the deepest facial vessels.
MaxR
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The large spot size quickly covers larger areas such as the back, legs, and chest.
MaxRs
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The small spot size is perfect for smaller areas such as the face, underams, and bikini line.
MaxYs
Optimized light technology for the treatment of unwanted pigmented lesions – ideal for the chest, arms and hands. The high peak power allows the removal of difficult to treat finer and lighter hair.
Lux1064
Comfortably clears a variety of leg vessels, from the smaller red vessels to the larger blue reticular leg veins. This handpiece can also be used for laser hair removal on darker skin types.
Lux1540 Fractional
Fractional, non-ablative laser for skin resurfacing and the treatment of surgical scars, acne scars and stretch marks – the only FDA cleared laser for this treatment. The various Microlenses allow for customized treatments; the XF Microlens for high speed, quick treatment sessions or the XD Microlens for deeper penetration to reach tough conditions such as scars and stretch marks.
2940 Fractional
Fractional, ablative laser for the wrinkles. This one-time treatment provides dramatic results with fast recovery and minimal downtime.
MaxIR
The Palomar MaxIR handpiece is an infrared handpiece that is designed for deep tissue coagulation. The MaxIR can be used on areas such as the legs, neck and abdomen. Skin Tightening, Non-Ablative Skin Rejuvenation, Body Contouring. Infrared heating on areas such as the neck, abdomen, and legs, and soft tissue coagulation.
#cynosure #cynosurelaser #beautylaserequipment
With the Icon system, aesthetic practices can provide the most popular treatments, including:
- laser skin resurfacing
- laser wrinkle reduction
- laser scar and stretch mark treatment
- permanent hair reduction
- vessel and pigment clearance
- leg vein clearance
Software Version: 4.20; Total System Pulse Count = 26,700 Pulses; Handpieces Included and Pulse Counts: MaxG Handpiece = 6,105 Pulses, MaxR Handpiece = 3,162 Pulses; Also Includes: Footswitch, Operator Eyewear, Patient Eyewear, Operators Manual, Treatment Guide.
Icon Product Specifications:
- Voltage: 90-264 VAC, 50/60 Hz (20 amp circuit required)
- Max Power: 1600 VA
- Repetition Rate: 0.2 – 6 Hz
- Dimensions: 23″W x 22″D x 41”H
- Weight: 135 lbs
- MaxG – Pigment & Vein
- Spot Size: 10 x 15 mm
- Cut Off Filter: 500 & 870 nm
- Fluence: Up to 80 J/cm2
- Spot Size: 16 x 46 mm
- Cut Off Filter: 650 nm
- Fluence: Up to 48 J/cm2
- Spot Size: 12 x 28 mm
- Cut Off Filter: 650 nm
- Fluence: Up to 72 J/cm2
- Spot Size: 12 x 28 mm
- Cut Off Filter: 525 nm
- Fluence: Up to 90 J/cm2
- Spot Size: 1.5,3,6 &10 mm
- Cut Off Filter: Nd-YAG
- Wavelength: 1064 nm
- Pulsewidth: 10-100 ms
- Spot Size: 12 & 15 mm
- Cut Off Filter: Er-Glass
- Wavelength: 1540 nm
- Pulsewidth: 10 & 15 ms
- Spot Size: 6 & 10 mm
- Cut Off Filter: Er-YAG
- Wavelength: 2940 nm
- Pulsewidth: 0.25, 3 7 5 ms
- Wavelength: 850-1350 nm
- Pulse Length: 2.5-10 sec.
- Energy: Up to 154 Joules
MaxG
Optimized light technology for superior clearance of vascular and pigmented lesions that goes beyond single-wavelength lasers. With the unique combination of Dynamic Spectrum ShiftingSM and dual-band filters, the MaxG provides more uniform heating across the entire diameter of the vessel, clearing even the deepest facial vessels.
MaxR
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The large spot size quickly covers larger areas such as the back, legs, and chest.
MaxRs
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The small spot size is perfect for smaller areas such as the face, underams, and bikini line.
MaxYs
Optimized light technology for the treatment of unwanted pigmented lesions – ideal for the chest, arms and hands. The high peak power allows the removal of difficult to treat finer and lighter hair.
Lux1064
Comfortably clears a variety of leg vessels, from the smaller red vessels to the larger blue reticular leg veins. This handpiece can also be used for laser hair removal on darker skin types.
Lux1540 Fractional
Fractional, non-ablative laser for skin resurfacing and the treatment of surgical scars, acne scars and stretch marks – the only FDA cleared laser for this treatment. The various Microlenses allow for customized treatments; the XF Microlens for high speed, quick treatment sessions or the XD Microlens for deeper penetration to reach tough conditions such as scars and stretch marks.
2940 Fractional
Fractional, ablative laser for the wrinkles. This one-time treatment provides dramatic results with fast recovery and minimal downtime.
MaxIR
The Palomar MaxIR handpiece is an infrared handpiece that is designed for deep tissue coagulation. The MaxIR can be used on areas such as the legs, neck and abdomen. Skin Tightening, Non-Ablative Skin Rejuvenation, Body Contouring. Infrared heating on areas such as the neck, abdomen, and legs, and soft tissue coagulation.
#cynosure #cynosurelaser #beautylaserequipment
Cynosure’s light-based aesthetic systems enable practitioners to deliver the widest range of laser treatments for skin revitilization, hair removal and more. When you decide on a treatment, you want to know it’s safety and effectiveness. That’s why you can feel good about the fact that we chose to partner with Cynosure.
CYNOSURE PALOMAR ICON WITH MAXG, MAXR, MAXYS, LUX1064, LUX1540 HANDPIECES 2020 FOR SALE!! (CYNOSURE PALOMAR ICON WITH MAXG, MAXR, MAXYS, LUX1064, LUX1540 )
The Icon Aesthetic System offers high peak powers, state-of-the-art cooling, built in calibration, and the Skintel Readerthe only FDA-cleared melanin reader resulting in fast treatments with excellent outcomes.
With the Icon system, aesthetic practices can provide the most popular treatments, including:
Icon Product Specifications
MaxG
Optimized light technology for superior clearance of vascular and pigmented lesions that goes beyond single-wavelength lasers. With the unique combination of Dynamic Spectrum ShiftingSM and dual-band filters, the MaxG provides more uniform heating across the entire diameter of the vessel, clearing even the deepest facial vessels.
MaxR
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The large spot size quickly covers larger areas such as the back, legs, and chest.
MaxRs
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The small spot size is perfect for smaller areas such as the face, underams, and bikini line.
MaxYs
Optimized light technology for the treatment of unwanted pigmented lesions – ideal for the chest, arms and hands. The high peak power allows the removal of difficult to treat finer and lighter hair.
Lux1064
Comfortably clears a variety of leg vessels, from the smaller red vessels to the larger blue reticular leg veins. This handpiece can also be used for laser hair removal on darker skin types.
Lux1540 Fractional
Fractional, non-ablative laser for skin resurfacing and the treatment of surgical scars, acne scars and stretch marks – the only FDA cleared laser for this treatment. The various Microlenses allow for customized treatments; the XF Microlens for high speed, quick treatment sessions or the XD Microlens for deeper penetration to reach tough conditions such as scars and stretch marks.
2940 Fractional
Fractional, ablative laser for the wrinkles. This one-time treatment provides dramatic results with fast recovery and minimal downtime.
MaxIR
The Palomar MaxIR handpiece is an infrared handpiece that is designed for deep tissue coagulation. The MaxIR can be used on areas such as the legs, neck and abdomen. Skin Tightening, Non-Ablative Skin Rejuvenation, Body Contouring. Infrared heating on areas such as the neck, abdomen, and legs, and soft tissue coagulation.
#cynosure #cynosurelaser #beautylaserequipment
With the Icon system, aesthetic practices can provide the most popular treatments, including:
- laser skin resurfacing
- laser wrinkle reduction
- laser scar and stretch mark treatment
- permanent hair reduction
- vessel and pigment clearance
- leg vein clearance
Icon Product Specifications
- Voltage: 90-264 VAC, 50/60 Hz (20 amp circuit required)
- Max Power: 1600 VA
- Repetition Rate: 0.2 – 6 Hz
- Dimensions: 23″W x 22″D x 41”H
- Weight: 135 lbs
- MaxG – Pigment & Vein
- Spot Size: 10 x 15 mm
- Cut Off Filter: 500 & 870 nm
- Fluence: Up to 80 J/cm2
- Spot Size: 16 x 46 mm
- Cut Off Filter: 650 nm
- Fluence: Up to 48 J/cm2
- Spot Size: 12 x 28 mm
- Cut Off Filter: 650 nm
- Fluence: Up to 72 J/cm2
- Spot Size: 12 x 28 mm
- Cut Off Filter: 525 nm
- Fluence: Up to 90 J/cm2
- Spot Size: 1.5,3,6 &10 mm
- Cut Off Filter: Nd-YAG
- Wavelength: 1064 nm
- Pulsewidth: 10-100 ms
- Spot Size: 12 & 15 mm
- Cut Off Filter: Er-Glass
- Wavelength: 1540 nm
- Pulsewidth: 10 & 15 ms
- Spot Size: 6 & 10 mm
- Cut Off Filter: Er-YAG
- Wavelength: 2940 nm
- Pulsewidth: 0.25, 3 7 5 ms
- Wavelength: 850-1350 nm
- Pulse Length: 2.5-10 sec.
- Energy: Up to 154 Joules
MaxG
Optimized light technology for superior clearance of vascular and pigmented lesions that goes beyond single-wavelength lasers. With the unique combination of Dynamic Spectrum ShiftingSM and dual-band filters, the MaxG provides more uniform heating across the entire diameter of the vessel, clearing even the deepest facial vessels.
MaxR
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The large spot size quickly covers larger areas such as the back, legs, and chest.
MaxRs
Optimized light technology for permanent hair reduction on all skin types, including tanned skin. The small spot size is perfect for smaller areas such as the face, underams, and bikini line.
MaxYs
Optimized light technology for the treatment of unwanted pigmented lesions – ideal for the chest, arms and hands. The high peak power allows the removal of difficult to treat finer and lighter hair.
Lux1064
Comfortably clears a variety of leg vessels, from the smaller red vessels to the larger blue reticular leg veins. This handpiece can also be used for laser hair removal on darker skin types.
Lux1540 Fractional
Fractional, non-ablative laser for skin resurfacing and the treatment of surgical scars, acne scars and stretch marks – the only FDA cleared laser for this treatment. The various Microlenses allow for customized treatments; the XF Microlens for high speed, quick treatment sessions or the XD Microlens for deeper penetration to reach tough conditions such as scars and stretch marks.
2940 Fractional
Fractional, ablative laser for the wrinkles. This one-time treatment provides dramatic results with fast recovery and minimal downtime.
MaxIR
The Palomar MaxIR handpiece is an infrared handpiece that is designed for deep tissue coagulation. The MaxIR can be used on areas such as the legs, neck and abdomen. Skin Tightening, Non-Ablative Skin Rejuvenation, Body Contouring. Infrared heating on areas such as the neck, abdomen, and legs, and soft tissue coagulation.
#cynosure #cynosurelaser #beautylaserequipment
Cynosure's industry-leading aesthetic platform provides a comprehensive suite of popular treatments for your patients, from hair removal to procedures for pigmentation, vessels, wrinkles, scars, and stretch marks.
CYNOSURE PALOMAR PICOSURE WITH 755NM TATTOO & PIGMENT REMOVAL 2021 FOR SALE!! (CYNOSURE PALOMAR PICOSURE 2021)
PicoSure and the breakthrough FOCUS Lens Array are enabling new methods of skin revitalization and revenue expansion opportunities not possible with any other laser platform.
PicoSure creates an intense photothermal impact in trillionths of a second. Its advanced technology prevents the skin from getting any thermal damage and targets the chromophore for better clearance in far fewer treatments. PicoSure has got clinical validation with 26 publications and 59 abstracts to date. The evidence speaks for itself!
There are three wavelengths of Cynosure’s PicoSure laser: 532nm, 755nm, and 1064 nm, making it ideal for the treatment of pigmentary conditions. With the addition of the Focus™ Lens Array, patients can also treat hard skin conditions in addition to removing tattoos with pinpoint precision.
2021 Cynosure Palomar Picosure with 755nm Alexandrite for Tattoo & Pigment Removal for Skin Types I-IV. Manufactured 06/2021; Excellent Cosmetic and Operating Condition; Reason for Selling: Downsizing; Software Release Version: V2.04; Lamp Count = 487,931 Pulses, System Pulse Count = 544,211 Pulses; Includes: 755nm Zoom Handpiece with 6mm, 8mm, 10mm & 2-6mm Spot Size Attachments, (5) Distance Gauges, (3) Focus Lens Array, Footswitch, Patient Eyewear, (2) Operator Eyewear, Operator Manual, Marketing Material.
Picosure Product Specifications:
755 nm Applications:
#cynosure #cynosurelaser #beautylaserequipment
PicoSure creates an intense photothermal impact in trillionths of a second. Its advanced technology prevents the skin from getting any thermal damage and targets the chromophore for better clearance in far fewer treatments. PicoSure has got clinical validation with 26 publications and 59 abstracts to date. The evidence speaks for itself!
There are three wavelengths of Cynosure’s PicoSure laser: 532nm, 755nm, and 1064 nm, making it ideal for the treatment of pigmentary conditions. With the addition of the Focus™ Lens Array, patients can also treat hard skin conditions in addition to removing tattoos with pinpoint precision.
2021 Cynosure Palomar Picosure with 755nm Alexandrite for Tattoo & Pigment Removal for Skin Types I-IV. Manufactured 06/2021; Excellent Cosmetic and Operating Condition; Reason for Selling: Downsizing; Software Release Version: V2.04; Lamp Count = 487,931 Pulses, System Pulse Count = 544,211 Pulses; Includes: 755nm Zoom Handpiece with 6mm, 8mm, 10mm & 2-6mm Spot Size Attachments, (5) Distance Gauges, (3) Focus Lens Array, Footswitch, Patient Eyewear, (2) Operator Eyewear, Operator Manual, Marketing Material.
Picosure Product Specifications:
- Nominal Wavelength: 755 nm
- Pulse Duration: 550-750 ps
- Pulse Energy: 165-200 mJ
- Spot Sizes: Zoom – 2.0 mm – 6.0 mm, Fixed – 6.0 mm, 8.0 mm, 10.0 mm
- Optional Wavelength Add On: 532 nm
- Electrical Power: 200-240 V, 4.5 kVA, 50/60 Hz, single phase
- Electrical Service Requirement: 30 Amp
755 nm Applications:
- Tattoo Removal for Skin Types I-IV
- Pigmented Lesion Removal for Skin Types I-IV
- Pigmented Lesion Removal for Skin Types I-IV
- Acne Scars for Skin Types I-IV
- Wrinkles for Skin Types I-IV
- Tattoo Removal for Skin Types I-III
#cynosure #cynosurelaser #beautylaserequipment
PicoSure is the worlds first aesthetic picosecond laser, widely recognized for its technology leadership, proven performance and industry-leading body of clinical evidence. With features like Boost Adjustable Pressure and optional 1064 and 532 nm wavelengths, PicoSure offers the unmatched versatility of all-color tattoo removal and with a high degree of safety for every patient.
CYNOSURE PALOMAR VECTUS HIGH SPEED DIODE LASER HAIR REMOVAL 2014 FOR SALE!! (CYNOSURE PALOMAR VECTUS HIGH SPEED DIODE LASER 2014)
The palomar vectus has been a staple in the diode laser hair removal community. However the system is notorious for having its diode burn out after a while. This issue can be countered by replacing the diode which is very expensive. In addition, no one wants to wait for a new diode to be ordered or an entire handpiece to be replaced because they have to reschedule all their patients and lose revenue. Therefore, All States Med offers an affordable and time manageable solution to this problem.
The Palomar Vectus Handpiece utilizes diode laser technology and a large spot size making it one of the fastest hair removal handpieces available on the market today. Uniform beams emitted from the optic fitting helps to reduce hot spots. Advanced Contact Cooling is another key feature and the large sapphire block provides excellent heat transfer. And no disposables are required.
Manufactured 05/2014; Excellent Cosmetic and Operating Condition, This Device Has Received Full Maintenance and Certification that this is Fully Functional at Highest Levels; Reason for Selling: Downsizing; Software Version: 3.30. Total System Pulse Count = 385,123 Pulses; Handpiece Pulse Count = 148,064 Pulses; Includes: Vectus Handpiece, Small Optic Tip Attachment, Large Optic Tip Attachment, Skintel Melanin Reader, Operator Manual.
Vectus Product Specifications:
#cynosure #cynosurelaser #beautylaserequipment
The Palomar Vectus Handpiece utilizes diode laser technology and a large spot size making it one of the fastest hair removal handpieces available on the market today. Uniform beams emitted from the optic fitting helps to reduce hot spots. Advanced Contact Cooling is another key feature and the large sapphire block provides excellent heat transfer. And no disposables are required.
Manufactured 05/2014; Excellent Cosmetic and Operating Condition, This Device Has Received Full Maintenance and Certification that this is Fully Functional at Highest Levels; Reason for Selling: Downsizing; Software Version: 3.30. Total System Pulse Count = 385,123 Pulses; Handpiece Pulse Count = 148,064 Pulses; Includes: Vectus Handpiece, Small Optic Tip Attachment, Large Optic Tip Attachment, Skintel Melanin Reader, Operator Manual.
Vectus Product Specifications:
- Wavelength: 810 nm
- Pulse Width: 5ms – 300ms
- Spot Size: 23 x 38mm
- Max Fluence: 100 J/cm2
- Repetition Rate: Up to 3 Hz
- Electrical: 100-240 VAC 20 amp circuit required
- Dimensions: 22 x 23 x 41″
- Weight: 120 lbs
#cynosure #cynosurelaser #beautylaserequipment
The Vectus Laser is the intelligent choice for the fastest laser hair removal. With the proven reliability and low ownership cost of diode technology, the Vectus Laser provides high-volume permanent hair reduction for a wide range of skin and hair types without sacrificing client comfort. Featuring the largest spot size and most uniform beam profile available today, the Vectus laser allows providers to quickly treat unwanted hair, even in the largest areas, such as the back, in less than five minutes.
CYNOSURE SMARTSKIN CO2 LASER SKIN RESURFACING 2014 FOR SALE!! (CYNOSURE SMARTSKIN CO2 LASER SKIN RESURFACING 2014)
Fractional photothermolysis with a CO2 laser shows promise in the treatment of photodamaged skin. The purpose of this study was to evaluate a fractional CO2 laser device (SmartSkin, Cynosure, Westford, MA) for the treatment of facial photodamage.
Cynosure Smartskin Fractional CO2 Laser; Excellent Cosmetic & Operating Condition; Manufactured 2014; Reason for Selling: Downsizing; Includes: Scanner Handpiece, Footswitch, Key,Operator Manual.
SmartSkin Performa CO2 laser is the latest generation and the most sophisticated of laser in tissue rejuvenation and skin resurfacing technology with fast, visible results and minimal downtime.
#cynosure #cynosurelaser #beautylaserequipment
Cynosure Smartskin Fractional CO2 Laser; Excellent Cosmetic & Operating Condition; Manufactured 2014; Reason for Selling: Downsizing; Includes: Scanner Handpiece, Footswitch, Key,Operator Manual.
- System Type:Co2
- Wavelength:10,600 nm
- Power:30 W (max)
- Output Mode:Multimode
- Method of optical output:Articulated Arm
- Aiming Beam:Laser Diode, 3 mW @ 635-670 nm
- Electrical Requirements:100-115 V / 10 A (max) /50-60 Hz
- Size: 46.1″ H x 18.1″ W x 24.00″ D (117 cm x 46 cm x 61 cm)
- Weight:108 lbs (49 kg)
- Evacuation System:Buffalo Filter Smoke Evacuator – Available Separately
- Scanner:
- Scan Area Size:15 mm x 15 mm (max)
- Spot Size:350 um
- Scan Mode:Normal, Interlaced and Autofill*, *Not available in ablative mode
- Mode:Super Pulsed
- Pulse Duration:0.2 ms – 2.0 ms (Fractional Ablative); 0.2 ms – 20.0 ms (Ablative)
- Density:1 – 78% (Fractional Ablative; 78% (Ablative)
- 4″ Surgical Handpiece:
- Spot Size d63:0.214 mm
- Mode:Continuous, Pulsed and Super Pulsed
SmartSkin Performa CO2 laser is the latest generation and the most sophisticated of laser in tissue rejuvenation and skin resurfacing technology with fast, visible results and minimal downtime.
#cynosure #cynosurelaser #beautylaserequipment
SmartSkin Performa CO2 laser is the latest generation and the most sophisticated of laser in tissue rejuvenation and skin resurfacing technology with fast, visible results and minimal downtime.
CYNOSURE NUVOLASE PINPOINTE 1064NM ND YAG FOOT LASER 2012 FOR SALE!! (CYNOSURE NUVOLASE PINPOINTE 1064NM ND YAG FOOT LASER 2012)
NuvoLase Inc., a privately-held medical device company located in Chico, California and manufacturer of the PinPointe™ FootLaser™, announced today their organization has received their ISO 13485 certification for its Quality Management System. NuvoLase’s scope of registration includes design, development, production, installation and service.
The PinPointe FootLaser was the first light-based device to receive FDA clearance specific to onychomycosis, commonly known as nail fungus. With almost 100,000 procedures performed worldwide with the PinPointe FootLaser, the FootLaser remains one of the only devices on the market today with documented clinically proven efficacy.
2012 NuvoLase PinPointe Foot Laser – for the Removal of Toe Nail Fungus; Manufactured 06/2012; Excellent Cosmetic and Perfect Operating Condition, Single Owner; Reason for Selling: No Longer Providing Laser Services; Includes: Laser Fiber Handpiece, Key, Footswitch, Operator Manual.
Product Specifications:
#cynosure #cynosurelaser #beautylaserequipment
The PinPointe FootLaser was the first light-based device to receive FDA clearance specific to onychomycosis, commonly known as nail fungus. With almost 100,000 procedures performed worldwide with the PinPointe FootLaser, the FootLaser remains one of the only devices on the market today with documented clinically proven efficacy.
2012 NuvoLase PinPointe Foot Laser – for the Removal of Toe Nail Fungus; Manufactured 06/2012; Excellent Cosmetic and Perfect Operating Condition, Single Owner; Reason for Selling: No Longer Providing Laser Services; Includes: Laser Fiber Handpiece, Key, Footswitch, Operator Manual.
Product Specifications:
- Wavelength: 1064 nm, Nd Yag
- Pulse Energy: 200 Millijoules (Max)
- Pulse Width: 100 Microseconds
- Repetition Rate: 30 Hertz Max
- Preset Select: 3 fixed settings
- Delivery: Fiber
- Laser Classification: Class IIIb
- Wavelength: 630 to 680 nanometers
- Power: Less than 1.0 milliwatt
- Time Set:1-90 seconds
- AC Power: 120 V~, 60 Hz, 8 A
- Size: 32 in H x 13 in W x 14 in D
- Weight: 38 lb, 17.2 kg
#cynosure #cynosurelaser #beautylaserequipment
The first clinically proven laser device for onychomycosis, or nail fungus. PinPointe FootLaser is turning feet that suffer from unsightly nail fungus into happy feet for men and women the world over. Indicated for use for the temporary increase of clear nail in patients with onychomycosis. e.g., dermatophytes Trichophyton rubrum and T. mentagrophytes, and/or yeasts Candida albicans, etc.
CYNOSURE HOYA CONBIO REVLITE 532NM, 582NM, 650NM & 1064NM TATTOO, PIGMENT, SCAR, & WRINKLES 2011 FOR SALE!! (CYNOSURE HOYA CONBIO REVLITE 2011)
Built with the help of ConBio's q-switch technology comes the Cynosure Revlite SI and upgrade version of the Cynosure Revlite. It is a multi-wavelength q switch laser for the treatment of multi coloured tattoos and pigmentations as well as some aesthetic procedures. The system provides great
Rely on 1064nm and 532nm wavelengths for powerful non-ablative skin resurfacing, reducing wrinkle and acne scars, treating pigmented lesions including melasma as well as a spectrum of tattoo colors—all with our Revlite SI laser.
The Cynosure RevLite delivers q switch 1064nm and 532nm, with dye handpieces increasing the capabilities to offer 585nm and 650nm wavelengths. This allows you to target all colours of tattoo as well as performing other treatments such as
Manufactured 05/2011; Excellent Operating Condition and Good Cosmetic Condition, Single Owner, Received Full Maintenance Service & Is Certified to Be Fully Functional at Highest Levels on 04/05/2022, Record Available Upon Request. Cumulative Pulses = 16,694,466 Pulses; Treatment Pulses = 14,548,339 Pulses; 585nm Pulses = 48,766 Pulses; 650nm Pulses = 30,125 Pulses; Includes: Operator Eyewear, Patient Eyewear, Footswitch, Key.
Revlite Product Specifications
System Type: Nd Yag, 532Lite Handpiece & Dye Impregnated Polymers
Wavelengths: 1064nm, 532nm, 585nm, 650nm
System Type – Nd Yag: Wavelength = 1064nm & 532nm; Pulse Width = 5-20 nsec; Maximum Rep Rate = 10 Hz
Electrical Requirements:220 V, Single Phase, 8 Amp, 50/60Hz, 10 Amps at 220 V AC
Size (H x W x D):113 cm x 30.5 cm x 72.5 cm
Weight:59.4 kg
#cynosure #cynosurelaser #beautylaserequipment
- Efficacy
- Power
- Comfort
- Treatment capabilities
Rely on 1064nm and 532nm wavelengths for powerful non-ablative skin resurfacing, reducing wrinkle and acne scars, treating pigmented lesions including melasma as well as a spectrum of tattoo colors—all with our Revlite SI laser.
- SmartInfinite (SI) handpiece
- MultiLite dye handpieces
- 532Lite handpiece
- PhotoAcoustic Technology Pulse (PTP) mode
- Precision beam technology
The Cynosure RevLite delivers q switch 1064nm and 532nm, with dye handpieces increasing the capabilities to offer 585nm and 650nm wavelengths. This allows you to target all colours of tattoo as well as performing other treatments such as
- non-ablative skin resurfacing
- wrinkle reduction
- Acne scarring
- epidermal lesions
- melasma
Manufactured 05/2011; Excellent Operating Condition and Good Cosmetic Condition, Single Owner, Received Full Maintenance Service & Is Certified to Be Fully Functional at Highest Levels on 04/05/2022, Record Available Upon Request. Cumulative Pulses = 16,694,466 Pulses; Treatment Pulses = 14,548,339 Pulses; 585nm Pulses = 48,766 Pulses; 650nm Pulses = 30,125 Pulses; Includes: Operator Eyewear, Patient Eyewear, Footswitch, Key.
Revlite Product Specifications
System Type: Nd Yag, 532Lite Handpiece & Dye Impregnated Polymers
Wavelengths: 1064nm, 532nm, 585nm, 650nm
System Type – Nd Yag: Wavelength = 1064nm & 532nm; Pulse Width = 5-20 nsec; Maximum Rep Rate = 10 Hz
- 1064nm Maximum Fluence Per Spot Size – 8.5mm = 2.1 J/cm2, 8mm = 2.3 Jcm2, 6mm 4.2 Jcm2, 4mm = 9.4 J/cm2, 3mm = 12 J/cm2, 2mm = 12 J/cm2, 1.5mm = 12 J/cm2, 1.5mm = 12 J/cm2; PTP Mode – 8.5mm = 2.7 J/cm2, 6mm = 5.5 J/cm2
- 532nm Maximum Fluence Per Spot Size – 6mm = 1.5 J/cm2, 4mm = 3.4J/cm2, 3mm = 5 J/cm2, 2mm = 5 J/cm2, 1.5mm = 5 J/cm2, 1.2mm = 5 J/cm2; PTP Mode – 6mm = 1.6 J/cm2
- 532nm Maximum Fluence Per Spot Size – 3mm = 0.4 J/cm2, 2mm = .08 J/cm2, 1.5mm = 1.4 J/cm2, 1.2mm = 2.3 J/cm2
- 585nm Maximum Fluence per Spot Size – 2mm = 8.2 J/cm2; Maximum Rep Rate = 2 Hz
- 650nm Maximum Fluence per Spot Size – 2 mm = 5.5 J/cm2; Maximum Rep Rate = 1 Hz
Electrical Requirements:220 V, Single Phase, 8 Amp, 50/60Hz, 10 Amps at 220 V AC
Size (H x W x D):113 cm x 30.5 cm x 72.5 cm
Weight:59.4 kg
#cynosure #cynosurelaser #beautylaserequipment
Built on the original ConBio Q-Switched laser technology, the Revlite SI is a multi-wavelength system providing superior efficacy, comfort, and power. It is trusted by practitioners worldwide.
CYNOSURE ACCLAIM LASER 2004 FOR SALE!! (CYNOSURE ACCLAIM LASER 2004)
The Acclaim 7000 Nd:YAG laser allows you to expand your practice by offering cosmetic procedures such as hair removal, treatment of leg and facial veins, our Dermique™ LaserFACIAL for sun-damaged skin. The Acclaim 7000 offers selectable parameters for customizing treatment based on skin and hair type, improving outcomes on a variety of patients.
Features :
Application : Laser hair removal, leg veins, facial telangiectasia, vascular lesions and non-invasive skin treatment.
#cynosure #cynosurelaser #beautylaserequipment
Features :
- Treats a wide variety of skin types (I-VI), including tanned skin.
- Provides high-peak power to effectively treat fine hair.
- Effective treatment of facial and leg telangiectasias (up to 3 mm).
- Successfully treats a wide variety of vascular lesions.
- Selectable laser parameters and spot sizes allow for a targeted approach to all veins.
- The Dermique Laser Facial reduces diffuse redness (the blush of rosacea) and minor facial veins.
- Quick and easy procedure with no patient downtime.
- Offers multiple applications, faster treatments, and greater patient throughput, making your practice more productive and profitable.
Application : Laser hair removal, leg veins, facial telangiectasia, vascular lesions and non-invasive skin treatment.
#cynosure #cynosurelaser #beautylaserequipment
The Cynosure Acclaim Aesthetic laser is a solid state Nd:YAG laser that is effective for laser hair removal on all skin types which includes tanned Skin. Nd:YAG is considered the gold standard for dark skin hair removal been both safe and effective.
CYNOSURE APOGEE ELITE PLUS FOR 755NM & 1064NM LASER HAIR REMOVAL 2017 FOR SALE!! (CYNOSURE APOGEE ELITE PLUS 2017)
This flexible and versatile combination has made it possible to offer treatments to people of all skin types and tones without multiple devices. The Alexandrite wavelength is suitable for most skin and hair types, while the Nd:YAG wavelength can target darker complexions safely and effectively.
The clinical proven 755 nm Alexandrite laser’s high melanin absorption characteristics and proven long-term results make it a wavelength for excellent hair reduction, permanently reducing hair by an average of 79% after just three treatments.1 The 755 nm Alexandrite can also provide excellent clearance of epidermal pigment lesions, including age spots, sunspots, and freckles. The Apogee is built on the proven technology of the Apogee Aesthetic Workstation but provides high fluence with large spot sizes for deeper penetration, faster procedures, and optimal results.
Indicated Uses:
Manufactured 06/2017; Perfect Operating Condition & Excellent Cosmetic Condition; Reason for Selling: Downsizing; Software Version: V1.4; System Has Received Full Maintenance and is Certified to Be Fully Functional at its Highest Levels on 05/20/2022, Record Available Upon Request; 755nm Alex Pulse Count = 1,873,390 Pulses, 1064nm Nd Yag Pulse Count = 330,740 Pulses; Includes Handpiece with Spot Sizes: 3mm, 5mm, 7mm, 10mm, 12mm, 15mm, and 18mm; Also Includes: Zimmer Cryo 6 Chiller, Operator Eyewear, Patient Eyewear, Key, Digital Operator Manual, Footswitch, Interlock, Water Refill Kit.
Elite Plus Product Specifications
System Type: Alexandrite & Nd Yag
Alexandrite
1064 Nd Yag
#cynosure #cynosurelaser #beautylaserequipment
The clinical proven 755 nm Alexandrite laser’s high melanin absorption characteristics and proven long-term results make it a wavelength for excellent hair reduction, permanently reducing hair by an average of 79% after just three treatments.1 The 755 nm Alexandrite can also provide excellent clearance of epidermal pigment lesions, including age spots, sunspots, and freckles. The Apogee is built on the proven technology of the Apogee Aesthetic Workstation but provides high fluence with large spot sizes for deeper penetration, faster procedures, and optimal results.
Indicated Uses:
- Laser Hair Removal for All Skin Types
- Pigment for All Skin Types
- Vascular Lesions for All Skin Types
- Skin Rejuvenation
- Wrinkle Reduction
Manufactured 06/2017; Perfect Operating Condition & Excellent Cosmetic Condition; Reason for Selling: Downsizing; Software Version: V1.4; System Has Received Full Maintenance and is Certified to Be Fully Functional at its Highest Levels on 05/20/2022, Record Available Upon Request; 755nm Alex Pulse Count = 1,873,390 Pulses, 1064nm Nd Yag Pulse Count = 330,740 Pulses; Includes Handpiece with Spot Sizes: 3mm, 5mm, 7mm, 10mm, 12mm, 15mm, and 18mm; Also Includes: Zimmer Cryo 6 Chiller, Operator Eyewear, Patient Eyewear, Key, Digital Operator Manual, Footswitch, Interlock, Water Refill Kit.
Elite Plus Product Specifications
System Type: Alexandrite & Nd Yag
Alexandrite
- Wavelength:755 nm
- Pulse Width:adjustable 0.5 – 300 msec
- Maximum Fluence per Spot Size
- 18 mm:20 J/cm2
- 15 mm:30 J/cm2
- 12 mm:45 J/cm2
- 10 mm:50 J/cm2
- 7 mm:60 J/cm2
- 5 mm:50 J/cm2
- Maximum Rep Rate:3 Hz
1064 Nd Yag
- Wavelength:1064 mm
- Pulse Width:adjustable 0.4 – 300 msec
- 18 mm:24 J/cm2
- 15 mm:35 J/cm2
- 12 mm:50 J/cm2
- 10 mm:80 J/cm2
- 7 mm:160 J/cm2
- 5 mm:240 J/cm2
- 3 mm:300 J/cm2
- Rep Rate:5 Hz
#cynosure #cynosurelaser #beautylaserequipment
The Cynosure Elite Aesthetic Laser Workstation is a dual-wavelength (755nm and 1064nm) system delivering a range of reliable, cost-effective treatments for hair removal, vascular treatments, epidermal pigment, and wrinkle reduction.
- 1